Products from Rane, Powered by Dante

Rane – DANTEx

The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz […]

Rane – EXP2x Dante Expander

The EXP2x is an input/output expander that enables the HAL1x to send 32 and receive 32 audio channels from other Dante™ devices.
Use the EXP2x to interface a HAL1x System with a Dante network. Applications abound in houses of worship, installed sound, performing arts venues, education and corporate environments. The EXP2x allows connecting a Dante […]

Rane – HAL 1x

A HAL1x Multiprocessor supports 16 in x 16 out audio, with 8 in x 8 out on balanced analog connections, and another 8 in x 8 out through RADs. It is unique among the HAL Multiprocessors because it carries an Expansion Bus, which can increase the I/O up to 512 in x 512 out by […]

Rane – HAL EXP1x

The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate.

Rane – HAL EXP3x

The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation).

Rane – HAL EXP5x

The EXP5x is a 12 Mic/Line/Line-Plus input & DSP expander for the HAL1x. It also supplies four DR ports, useful for adding source selection and/or volume control remote controls.

Rane – HAL EXP7x

The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block.

Rane – TERMINAL 1010x

The Terminal 1010x takes the DSP Experience to the next level with an intuitive front-panel that enables users to control 10 analog balanced inputs for Mic/Line/+48V and 10 balanced outputs. There are also 6 flexible RAD Plus PoE ports to connect breakout boxes and wall plate remote controls and 4 Universal GPIO logic ports for […]