Dante-enabled Products

Go to:    > Full Catalog of Dante-enabled Products     > New Products     > DDM Ready Products     > Featured Products     > Licensed Manufacturers     > Dante MY16-AUD2

This is a near-exhaustive catalog of products by pro audio and video manufacturers that utilize Dante networking technology. These include products with Dante built-in, Dante interface cards, and the products that can be Dante-enabled via option cards. Note: This information is maintained by Audinate, and may not reflect the full product range currently offered by the listed manufacturers. For up-to-date information on any product ranges, please contact the manufacturer directly.
Share the news with your friends and colleagues

CTP Systems - DIO88

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.

CTP Systems - DMIX30

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment.

CTP Systems - FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network.
In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs.
Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet.

CTP Systems - FWD8000

The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet.

CTP Systems - Prehear D4080

The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.

d&b audiotechnik - DS10

The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data

d&b audiotechnik - DS100

The d&b DS100 Signal Engine is a specialized rack-mount 3 RU audio processor with Audinate Dante networking. It provides a 64 x 64 audio matrix with level and delay adjustments at all cross points.The comprehensive input processing provides gain, EQ, delay, and polarity switches, enabling the user to combine all types of input signals to create a mix from a wide variety of sources. Extended processing capabilities are also provided on every output. Two optional software modules provide dynamic object-based positioning and emulated acoustics functions.

DAD - AX32

The DAD AX32 allows no-compromise audio recording, mastering, post production, and future-proof archiving A new feature is the inclusion of IP audio capabilities handling up to 512 channels on a 10

DAD - DX32

The DAD DX32 is a versatile digital audio bridge and router interface designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distributio

Dan Dugan - Model N

The Dugan Model N provides 32 channels of Dugan automixing at 96K or 64 channels at 48K with connection capabilities to a Dante network.

DELEC - Desk 16 Dante

The DELEC Desk 16 Dante is a 16-key desktop subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.

DELEC - oratis CS MF4

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck.

DELEC - oratis CS R4000

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck.

DELEC - oratis Talk 12 X Dante

The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.

DELEC - oratis Talk 16 Dante

The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.

DELEC - unito NAM 203

The unito NAM 203 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.

DELEC - unito NAM 602

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.

DELEC - unito NAM 603

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.

DELEC - unito NIO 0204

The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card.

DELEC - unito NIO 0800

The unito NIO 0800 provides bidirectional format conversion of AES/EBU audio to and from Dante. The NIO 0800 offers 8 AES inputs and outputs and uses RJ45 for high density, easy to use connections.

DELEC - unito NIO 1212

The unito NIO 1212 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1212 offers 12 AES and 12 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies.

DELEC - unito NIO 1624

The unito NIO 1624 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1624 offers 16 AES and 24 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies.

DHD audio - 52/DX

The compact 52/DX Desktop Mixer can be used for On-Air, in the OB van, for news, edit and ingest Stations. 

DHD audio - 52/MX

The 52/MX takes audio mixing to a totally new level in flexibility. There are many different control modules available – just pick what you need for your application. 

DHD audio - 52/RX

The 52/RX is a flexible mixing system that performs well in On‑Air studios, production suites, video post-production and in OB vans.

DHD audio - 52/SX

The 52/SX is a modular compact mixing console for radio and TV. The price-optimised mixer is ideal for On-Air studios, audio workstations and smaller OB vans. 

DHD audio - 52/TX

The 52/TX is a multitouch mixing console with an intuitive control interface for daily operation at news desks, in editing suites and in SNGs.

DiGiCo - 4REA4

At the heart of the system is the 4REA4 processing engine with DiGiCo connectivity options and powerful 4REA4 control software, providing routing, processing and mix control that allows your performance area to expand across your installation.

DiGiCo - Orange Box

Orange Box With DiGiCo's compact 2U Orange Box, you can use DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire.

DiGiCo - S21

DiGiCo's belief in audio quality and road worthy mechanical design has limited their ability to release an affordable introductory product. These values have required the same pioneering approach to design, not to follow the trend but to deliver the flagship for a price point - and change expectations. DiGiCo's S21 does exactly that. By using new, lower cost FPGA components programmed with the same audio algorithms, and combined with a new form of control processor, DiGiCo is able to deliver the S21 with the fundamental technological values at it's core.

DiGiCo - S31

Meet the S31, the latest console in the S Series, which opens even more doors, allows for increased functionality and accessibility, all at an affordable price point. This time around, there are 31 faders, and three 10" multi-touch screens... And it'll still fit in back the of the car!

DiGiCo - SD-Mini Rack

The SD-Mini Rack complements the SD-Nano and D racks to make a completely flexible remote rack solution for any situation.

DiGiCo - SD-Nano Rack

The SD-Nano Rack complements the SD, SD-Mini and D racks to make a completely flexible remote rack solution for any situation.

DiGiCo - SD-Rack

The DiGiCoSD Rack is the newly-designed rack for the various versions of the SD5, SD7, SD8,  SD9, SD10 and SD11 consoles.

DiGiCo - SD10

SD Ten features three banks of 12 motorised faders and one master fader, each of which benefits from its own high resolution LED bar graph meter.

DiGiCo - SD11

The SD11 is the smallest by far of all the DiGiCo consoles, though don't let that deceive you: this 19-inch rack mount or table top mixer is a very powerful solution that can be incorporated into pretty much any mixing environment.

DiGiCo - SD12

The SD12 is set to raise the bar in terms of what users will now expect from a compact, affordable, multi- application digital console.

DiGiCo - SD5

Like the SD10, the SD5's 37 faders are laid out in three convenient banks of 12 with one master fader with the added benefit of three 15-inch full colour TFT touch screens for even quicker access and multi-user applications.

DiGiCo - SD7

A combination of technologies have been seamlessly integrated into the SD7's worksurface to meet the everyday needs of any touring engineer.

DiGiCo - SD7 Quantum

Quantum is a newer and smarter engine which offers so much more to users on so many levels, and allows engineers to upgrade into new generation technology with no learning curve whatsoever. 

DiGiCo - SD7B

Though identical in appearance to the SD7, the SD7B goes a stage further as it has been developed for broadcast applications.

DiGiCo - SD8

The SD8 is a particularly versatile console with the same Stealth Digital Processing and floating point Super FPGA technology seen in the flagship SD7.

DiGiCo - SD9

The SD9 is a super-flexible, complete integrated system powered by Stealth Digital Processing and floating point Super FPGA technology.

Digidynam - DT-400

DT - 400 is with powerful function and no need to learn of the digital networked audio interface, provide 4 channel mic/line inputs with phantom power and 4 channel outputs.